🧱 DECKO Flexistone – Installation & Support Guide
Bring the natural beauty of stone to your home or commercial space with DECKO Flexistone — lightweight, flexible stone panels designed for easy DIY installation, indoors or out. Available in three ranges to suit different needs and aesthetics:
Product Ranges:
-
Brico Range: Self-adhesive backing, interlocking design (approx. size: 4 bricks stacked offset)
-
Pietra Range: 900 × 300 mm panels — no adhesive backing
-
Grande Range: 1200 × 600 mm panels — no adhesive backing
INSTALLATION GUIDE
Substrate Requirements:
Internal:
-
Suitable surfaces: Plasterboard, MDF (dry areas only), compressed fibre cement sheeting, brick, or concrete
-
Surface must be flat, clean, and dry
External:
-
Suitable surfaces: Compressed cement sheeting, exterior-grade plywood, brick, or concrete
-
Self-adhesive Brico panels not recommended outdoors
-
Priming may be required for porous or dusty surfaces
Cutting:
-
Utility knife: For straight cuts (score multiple times)
-
Jigsaw or fine-toothed circular saw: For curves or high precision
-
Always wear safety gear and support panels when cutting
Corners & Edges:
-
No pre-formed corner trims included
-
Installers typically:
-
Mitre cut at 45° for neat external corners
-
Use metal or colour-matched architectural trims
-
-
Window and door openings: Cut panels to fit and finish with sealant or trim
Adhesive Recommendations:
Application | Product | Notes |
---|---|---|
Internal | Liquid Nails HD, Soudal Fix All | Brico range: uses self-adhesive tape (dry areas only) |
External | Sikaflex 11FC, Bostik Seal N Flex FC | Only for Pietra & Grande ranges — NOT Brico |
Temporary fixing | Double-sided high-bond tape | For dry internal walls (Pietra/Grande only) |
For vertical applications, use bracing or painter’s tape to hold panels until adhesive sets.
Spacing & Grouting:
-
Panels are typically butt-jointed for seamless look
-
Grouting is not required
-
Optional: use colour-matched flexible sealant between joints for water resistance or aesthetics (especially outdoors)
CARE & MAINTENANCE
-
Cleaning:
-
Use soft cloth or sponge with mild detergent
-
Avoid high-pressure water jets (especially on joints)
-
Do not use abrasive scrubbers or acidic cleaners
-
-
Outdoor maintenance:
-
Check joints annually and reseal if needed
-
Ensure proper drainage to avoid water pooling
-
-
Repairs:
-
Individual panels can be removed and replaced if damaged
-
Use same adhesive and sealant type for replacements
-
TIPS & WARNINGS
-
Do not use Brico range panels outdoors — tape adhesive may fail in moisture or UV exposure
-
Always ensure substrate is level and structurally sound before installation
-
For fireplace surrounds, do not install in direct contact with flame or high heat zones
-
Store panels flat in a cool, dry space prior to install
📞 Need Help?
If you have further questions about your DECKO Flexistone installation or product selection, don’t hesitate to contact our support team at sales@decko.co.nz